Panasonic SC-CH60 - Manual (Page 28)

To clear a programmed track-------------------------------------------
1. Press CANCEL in the stop mode.
CANCEL indicator will light.
2. Specify which track is to be canceiled.
(i) Press DISC.
@ Press a numeric button (1 -3) to specify which disc contains
the track you want to cancel.
@ Press a numeric button corresponding to the track you want to
cancel.
3. Repeat step 2 If required.
4. Press CANCEL again.
CANCEL indicator will go out.
Listening to Compact Discs
(continued)
To add an entry
You can add an entry in the play or stop mode.
Press a numeric button to show which track is to
be added.
® Press DISC.
d) Press a numeric button (1-3) to specify which disc contains the
track you want to add.
@ Press a numeric button corresponding to the track you want to
add.
To cancel program play
Press CD PROGRAM to go off the program indi­
cator.
When pressed in the play mode, sequential play will resume.
Note:
When you press OPEN/CLOSE to open the disc drawer or press the
stop button in the stop mode, all the program is cancelled.
Program memory function
The unit’s memory will retain the programmed sequence until you
cancel it by opening the compact disc drawer or by pressing the stop
button in the stop mode. The sequence will remain in the unit's
memory for approximately
2 weeks.