Resetting the icm tape for future messages, If you have reset the tape by mistake, Jy 2 – Panasonic KX-T1470BA User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Direct Remote Operation
RESETTING THE ICM TAPE FOR FUTURE MESSAGES
To record new Incoming Messages from the beginning of the tape, after the recorded
messages have been played back or while they are being played;
Press “3”.
•“Reset tape“ will be announced. The unit
will rewind the tape to the beginning and a
beep will be heard.
Then hang up.
•If the Priority Message Is recorded, it will
be reset at the same time.
If you have used Memory Playback
Memory
Playback
1
Press “3”.
•The unit will rewind the tape to the
beginning of newly-recorded messages
and a beep will be heard.
Jy 2
Press “3” again.
•“Reset tape” will be announced and
future messages will be recorded from the
beginning of the ICM tape excluding the
Priority Message area.
If you have reset the tape by mistake
ABC
2
Press "2” after the tape has been reset
(“Skip" will be announced), then hang up.
•The unit will advance the tape to the end
of the recorded messages.
-
30
-