Specifications, Nv-sj400a, Power source – Panasonic nv-sj400 User Manual
Page 31: Video recording system: video heads, Tape format:. record/playback time, Ff/rewtime, Video, Input level: output level, Audio, Video horizontal resolution: signal-to-noise ratio
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Specifications
NV-SJ400A
Power Source:
Power Consumption:
220-240 V AC 50/60 Hz
16W
Video Recording System:
Video Heads:
Tape Speed:
Tape Format:.
Record/Playback Time:
FF/REWTime:
VIDEO
Television System:
Modulation System:
Input Level:
Output Level:
2 rotary heads, helical scanning system
4 heads
PAL SP; 23.39 mm/s LP;
11.7 mm/s
EP; 7.8mm/s
NTSC SP;
33.3 mm/s
EP;
11.1 mm/s
VHS tape
PAL SP; 240 min with NV-E240
PAL LP; 480 min with NV-E240
PAL EP; 720 min with NV-E240
approx. 60 s with NV-E180
CCIR; 625 lines, 50 fields, PAL colour signal
EIA; 525 lines, 60 fields, NTSC colour signal
Luminance; FM azimuth recording
Colour signal; converted subcarrier phase shift recording
VIDEO IN (PHONO);
1.0 Vp-p.
VIDEO OUT (PHONO):
1.0 Vp-p,
RF Modulated;
UHF channel A28-A69/E21-E69,
75 ohm, terminated
75 ohm, terminated
75 ohm
AUDIO
Input Level:
Output Level:
Audio Track:
Video Horizontal Resolution:
Signal-to-Noise Ratio:
Audio Frequency Response:
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
Standard Accessories:
AUDIO IN (PHONO);
AUDIO OUT (PHONO):
1 track (Normal-mono only)
Colour; more than 240 lines (SP)
Video; more than 43 dB (SP)
Audio: more than 43 dB (SP)
80 Hz-8 kHz/SP
5°C-40X
35%-80%
3.5 kg
470 ( W ) x 8 7 (H)x283 (D) mm
1 pc. RF Coaxial cable
1 pc. Remote Control
2 pcs, R6 size batteries
-6 dBV,
-6 dBV,
more than 47 kohm
less than 1 kohm
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
Note to electrical appliance dealers only
To Demonstrate “Programme List Search”
1 Eject a video cassette, if it has been inserted.
2 Keep pressing the SEARCH button
0
on the remote
controller for at least 5 seconds.
3 Then, the demonstration mode will be displayed on
the TV screen.
4 Press the MENU button © to stop the demonstration.
On Screen Display
31