Option setting – Panasonic nv-sj400 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Option Setting
To Select the Corresponding Video
Cassette Tape Length to Display the
Approximate Remaining Tape Time
(TAPE SELECT)
NWIH№
8EL£CT
(on^ALTV
(OFF
OFF
NTSC Pfi
8EL£CT
NTSCCONVEFnin
POWER SAVE
DIKCTREC
Wril [TTf
(OFF
Press the MENU button 0 to
display the Main menu on the
TV screen,
Press the Cursor buttons
( A T ) ©
to select “OPTION” then press the
ENTER button
Press the Cursor buttons
( A T ) ©
to select “TAPE SELECT” then
select the corresponding video
cassette tape length by pressing
the Cursor buttons (◄ ►) ©.
El80:
For E30, -60, -90, -120, -150 and -180 tapes.
El 95:
For El 95 tape.
E240:
For E240 tape.
E260:
For E260 and -300 tapes.
• The remaining tape time may not be displayed correctly
depending on the tape used.
Press the MENU button © twice to exit the On Screen
Display.
To Select the Colour TV System of the TV
Used to Record NTSC Signals
Follow steps 1 to 2 of TAPE SELECT.
3 Press the Cursor buttons
( A T ) ©
to select “NTSC INPUT SELECT
then select “AUTO" by pressing the
Cursor buttons (◄ ►) ©.
Allows NTSC “4.43" or “3.58"
signals to be distinguished
automatically.
If the tape has not recorded
correctly, select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system cannot
be recorded correctly at this position.
To Select the ColourTV System of the TV
Used to Play Back a Tape Recording NTSC
Signals
Follow steps 1 to 2 of TAPE SELECT.
3 Press the Cursor buttons
( A T ) ©
to select “NTSC PB SELECT then
select the desired position
according to the colour TV system
of the TV by pressing the Cursor
buttons (<4 ^) ©.
on PAL TV: For TVs that can receive PAL signals.
4.43:
For TVs that can receive NTSC 4.43 signals.
3.58;
For TVs that can receive NTSC 3.58 signals.
Press the MENU button © twice to exit the On Screen
Display.
To Play a NTSC Game on PAL System TV
Follow steps 1 to 2 of TAPE SELECT.
3 Press the Cursor buttons
( A T ) ©
to select “NTSC CONVERTER" then
select “ON” or “OFP by pressing the
Cursor buttons (-4 ^) ©.
OFF: Initially set at this position.
ON:
FAL TV can receive
signals from NTSC 3.58
signal source (e.g., NTSC
game machines.)
connected to the VCR
main unit. However, when
recording, this function
does not work.
• When receiving NTSC 4.43 signals, this function does
not work correctly
4 Press the MENU button © twice to exit the On Screen
Display.
CTi
.C
cc
4 Press the MENU button © twice to exit the On Screen
Display.
15