Weekly timer recording, Daily timer recording, Timer recording from an external signal source – Panasonic nv-sj400 User Manual

Page 22: Programming atimer recording of atv, Programme until its end, Tape speed auto change function ), Setting other programmes in succession, To activate the tape speed auto change function, Lp - a, Timer recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Weekly Timer Recording

In step 3 of 4-Key Programming, select the desired day by

pressing the DATE — button O-

For example, SU (Sunday)

On Screen Display

(SU=Sunday, MO=Monday, TU=Tuesday, WE=Wednesday,

TH=Thursday, FR=Friday, SA=Saturday)

Daily Timer Recording

For this timer function, several groups of days can be

selected.
® Daily recording from Monday to Friday (MO-FR)
d) Daily recording from Monday to Saturday (MO-SA)

In step 3 of 4-Key Programming, select the desired days by

pressing the DATE — button

For example, ©

Timer Recording from an External Signal

Source

If timer recording is performed by a unit connected to the

AudioA/ideo input sockets, select the A1 or A2 indicator in
step 2 of 4-Key Programming for the programme position.

Programming aTimer Recording of aTV
Programme Until its End

(Tape Speed Auto Change Function )

If the VCR determines that the remaining tape time is
insufficient to record the programme to its end during a timer
recording performed in the SP mode, this function
automatically changes the tape speed to ensure that the

whole'programme virill be recorded.

The tape speed will change as follows.

NTSC system:

SP ^ EP

PAL system:

SP —> LP

• This function cannot change the recording speed to the

EP mode for R4L system.

Depending on the remaining tape length, recording may be
performed in the LP (EP) mode from the start. However, if the

remaining tape time is still not sufficient in this case, the

programme cannot be recorded to the end.

Example of PAL system (Remaining Tape Time 60 min.):

End of Tape

30 min. I 30 min.

Video

Tape

Timer

Programmhg

30 min. Recording

by SP mode

15 min. Recording

by SP mode

30min. Recording

by LP mode 3rd Programme will

not be recorded.

• The tape length must be set correctly. (See page 15.)
• Some tapes may not work correctly.

Setting other Programmes in Succession

Repeat steps 1-7 of 4-Key Programming.

To Activate the Tape Speed Auto Change Function:

Press the SPEED button to select "A".

Every time you press the SPEED button^, the indication

changes in the following order:

NTSC system:

l%L system:

—>

---------- A <-------

j"~">SP

LP -

A <-