Panasonic SL-XP600 - Manual (Page 7)

To repeat a particular section
(A-B repeat)___________________
(Available only from the wireless remote
controller)
1 Press A-B during play at the
point where repeat play is to be
started (point A).
3
Press A-B at the point where re­
peat play is to be ended (point
B).
3'
To cancel the A-B repeat
Normal play is restored when A-B is pressed
again.
A-B repeat play is not possible during pro­
gram play or random play.
Music scan play
(Available only from the wireless remote
controller)
Allows you to listen to the beginning portion
(intro) of the tracks of a CD for 15 seconds
each, in order.
This is useful when playing discs inside a
car.
Preparation:
Set the unit to the stop mode, (See page 4.)
Press M.SCAN.
I/ n - n t
Ji u u t
After the beginning portion (15 seconds) of
every tracks has been piayed, normal play­
back begins starting with the first track.
To return to normal playback dur­
ing intro playback
During playback of the intro of the desired
track, press HI.
(The unit returns to normal playback.)
Extra Anti-Shock Function
This function mirtimizes sound interruptions
due to vibration when listening to a disc while
walking about or in a moving vehicle or train.
M.RESERVE indicator
Once the extra anti-shock function has been
activated, play data of up to 10 seconds can
be stored in the memory.
Therefore, even if the unit sustains an exter­
nal impact, the data stored in the memory is
sent to minimize sound interruptions during
play.
1 Set EXTRA ANTI-SHOCK to ON.
2 Press Ml-
The function starts to store the play
data, and the M.RESERVE indicator on
the display shows how much data is
stored.
•The EXTRA ANTi-SHOCK can be set dur­
ing play but doing so will produce a slight
gap in the sound due to a change in the
disc speed.
•While the extra anti-shock function is on,
the life span of the batteries is shortened
and sound made by the rotation of the disc
increases somewhat because the disc ro­
tates faster and the play data is stored.
M^RËSERVBçnpd^
C
Ж
jsor rÿ
Play mode (play (tata rnodii)^ ^ ^
Stable. Sound is heard (sufficiet data has
been stored).
Unit sustains a shock. Sound is heard (stored data is used).
Shock subsides. Sound is heard (data storage
commences).
Unit sustains
continuous shocks.
Sound is interrupted (no more data
is stored).
Listening to sound with the unit connected to an audio system
The extra anti-shock function incorporates digital signal compression technology. When listen­
ing to sound with the unit connected to an audio system at home, it is recommended that the
extra anti-shock switch be set to the OFF position.