Setting the date and time, Setting your iogo, Setting the date and time setting your logo – Panasonic KX-F750 User Manual

Page 36: Сюсюш, Юсюсю

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Basic Settings

Setting the date and time

The internal clock of the unit will print the date and time, on the top line of all fax messages you transmit,

and on the fax communication reports such as the journal report and the transmission report.

Press MENU.

1.SYSTEM SET UP

сюсюш

Press #01.

SET DATE & TIME

START/SET

Press START/SET.

01/01/94 12:00A

ффф

сэф®
CDd)CÈ)

Enter the current

month/day/year/hour/
minute by selecting each
2 digits. Then press *

for AM or press # for PM.

Example:

Aug. 10 1994, 3:00 PM

Press 08 10 94 03 00,

then press # to select

PM.

Press START/SET to

store the setting.

Press MENU to end the

program.

Notes:
• When you make a mistake while programming, press the STOP button, then make the correction.

• The accuracy of the clock will be approximately ± 45 seconds a month at room temperature.

Setting your iogo

The logo is used to identify fax messages that are being transmitted by your unit. It may consist of

alpha-numeric letters and symbols. Usually the logo is a company, division or personal name in an

abbreviated form.

(ЮСЮСЮ

START/SET

Press MENU.

1.SYSTEM SET UP

Press #02.

YOUR LOGO

Press START/SET.

LOGO=

срфф
срфср
сЬфс±)
свФсю

START/SET

Enter your logo up to

30 characters by

following the instructions
on page 34.

Press START/SET to

store the setting.

Press MENU to end the

program.

Note:
• When the first character is entered, the preset logo will be cleared.