Panasonic KX-F750 - Manual (Page 32)

Basic Settings
User Programmable Features
The unit has the following programming features.
Basic features are the settings that need to be programmed upon completing the installation. Most
probable choices have been pre-selected, but some features, such as codes #01, #02 and #03, must be
programmed by user.
Advanced features should be programmed as the need arises.
Programming feature table
Basic features
Code Feature Description Selection Page
#01 SET DATE & TIME Setting the current date and time. 36
#02 YOUR LOGO Setting your company name or
personal name. up to 30 digits 36
#03 YOUR TELEPHONE
NUMBER
Setting your facsimile telephone
number. up to 20 digits 37
#04 PRINT
TRANSMISSION
REPORT
Setting individual transmission report
printing. ERROR/
ON/
OFF
37
#06 TEL/FAX DELAYED
RING
Setting the number of rings on the
extension phone (if connected)
before the unit answers a call in the
TEL7FAX mode.
V2/3/4 25
#07 FAX RING COUNT Setting the number of rings to
answer in the FAX mode.
V2/3/4 26
#08 ANS/FAX RING COUNT Setting the number of rings to
answer in the ANS/FAX mode.
1/2/3/4/
TOLL SAVER/
RINGER OFF
23
#09 RECORDING TIME
FOR ANS Setting the recording time for
incoming message. VOX (unlimited)/
1 MIN (Iminute)
14
#10 REMOTE ANS ID Setting the remote control ID for
remote operation of the answering
device.
1-3 digits
(111)
59
Note: In the “Selection” column, the underlined print indicates the pre-selected settings.
32