Amplifier section, Amplifier section |sc-ak2, Fm tuner section frequency ran – Panasonic SC-AK52 EN User Manual
Page 31: Am tuner section frequency range, Cassette deck section, Cd section, Speaker section, Notes, Specifkatìons
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Specifkatìons
AMPLIFIER SECTION
SC-AK52
RMS Power output
10% Total harmonic distortion
80 Hz, both channels driven
(Low channel) 115W per channel (6Q)
1 kHz, both channels driven
(High channel) 45 W per channel (6 £2)
Total Bl-Amp power 160 W per channel
Input sensitivity
AUX
250 mV
Input impedance
AUX
13k£2
AMPLIFIER SECTION
|SC-AK2^
RMS Power output
10% Total harmonic distortion,
both channels driven
SOW per channel (6£2)
Input sensitivity
AUX
250 mV
Input impedance
AUX
13k£2
FM TUNER SECTION
Frequency ran^
87.50 - 108.00 MHz (50 kHz steps)
(For United Kingdom and Europe)
Sensitivity
1.8 pV (I H F)
S/N26dB
1.5 pV
(For Australia and New Zealand)
Sensitivity
2.5pV(IHF)
S/N26dB
2.2 pV
Antenna terminal(s) 75 £2 (unbalanced)
AM TUNER SECTION
Frequency range
522 - 1629 kHz (9 l^z steps)
Sensitivity
S/N 20 dB (at 999 kHz)
560 pV/m
CASSETTE DECK SECTION
Track system
4 track, 2 channel
Heads
Record/playback
Solid
permalloy
head
Erasure
Double gap ferrite head
Motor
DC servo motor
Recording
system
AC
bias
100
kHz
Erasing system
AC erase 100 kHz
Tape speed
4.8 cm/s
Frequency response
(+3dB, -6dB at DECK OUT)
NORMAL (TYPE i) 35 Hz - 14 kHz
(For SC-AK52, SC-AK44 and SC-AK22:
Russia and Ukralna only)
HIGH (TYPE II)
35 Hz - 14 kHz
S/N
50 dB (A weighted)
Wow and flutter
0.18% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
CD SECTION
Sampling frequency
44.1 kHz
Decoding
16 bit linear
Beam source/wavelength
Semiconductor laser/780nm
Bolgelengde
780 nm
Laser-styrke
Ingen farlig strltlning
sendes ut
Number of channels
Stereo
Frequency response
20 Hz-20 kHz (+1,-2dB)
Wow and flutter Below measurable limit
Digital filter
8fs
D/A converter
MASH (1 bit DAC)
SPEAKER SECTION
SPEAKER SECTION
SB-AK52|'SB^AK44l
Type
Speakeres)
Super Woofer
Woofer
Tweeter
Impedance
HIGH
LOW
Input power
HIGH
LOW
Output sound pressure level
87dB/W (1.0 m)
Cross over frequency 150 Hz, 5 kHz
Frequency range 45 Hz-22 kHz (-16 dB)
55 Hz-20 kHz (-lOdB)
Dimensions (WxKxD) 230 x 332 x 291 mm
Mass
4.3 kg
3 way speaker system
17 cm cone type
12 cm cone type
6 cm cone t^e
6£2
6£2
60 W (Music)
140W (Music)
ISB-AK22I
Type
Speaker(s)
Woofer
Tweeter
Impedance
Input power
2 way speaker system
12 cm cone type
6 cm cone type
6£2
100 W (Music)
Output sound pressure level
85dB/W (1.0 m)
Cross over frequency
5 kHz
Frequency range
45 Hz-22 kHz (-16 dB)
55 Hz-20 kHz (-lOdB)
Dimensions (WxHxD) 211 x 332 x 250 mm
Mass
2.8 kg
GENERAL
Power supply
(For United Kingdom, Australia
and New Zealand)
(For others)
Power consumption
AC 230-240 V, 50 Hz
AC 230 V, 50 Hz
(SC-AK52)
185W
(SC-AK44)
185W
(SC-AK22)
170W
Standby
0.4W
Dimensions (WxHxD) 250 x 332 x 316 mm
Mass
(SC-AK52) 8.5 kg
(SC-AK44) 8.5 kg
(SC-AK22) 8.2 kg
Notes:
1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. (For SB-AK52 and SB-AK44)
The labels “HIGH" and “LOW" on the
rear
of
the
speakers
refer
to
High
frequency and Low frequency.