Only, Dial [sound eq] to display “manual, Adjust the sound quality – Panasonic SC-AK52 EN User Manual
Page 26: Va^ifi^ vf« #oui a¿qústw irhajgie, Press [30 al] to adjust the surround level, A¿qústw irhajgie, With the equqbzer lyr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VátyinQ ihe sound quality with the
h$€mum equalizer
SC-AK52
only
Dial [SOUND EQ] to display “MANUAL’\
When it is Ujrned clockwise, the settings are selected in the
following sequence.
© H E A V Y ^
@ CLEAR
©SOFT
© DISCO
® LIVE
® HALL
© MANUAL
® Al-EQ
@ FLAT---------
Adjust the sound quality.
© <--------
* *
direction:
For selecting the range of the sound to
be adjusted
Characteristics of each sound range
Under 100 Hz:
Around 330 Hz:
Around 1 kHz:
Around 3.3 kHz:
Above 10 kHz:
I
T direction:
Super woofer range
Bass to midrange
Midrange
Midrange to treble
Treble
@ i T direction:
For adjusting the level (7 steps)
When tie level is in the center, the dot flashes rapidly.
Repeat steps ® and © to set tiie desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQ] to display “FLAT’.
• The sound quality setting is stored automatically. It is recalled when
“MANUAL” is next selected.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
Va^ifi^ Vf« #oUi
a¿qústw irhajgie
'
with the
equqBzer lyr
SC-AK52
l
I¡3
b
C-AK44
only
The A1 equalizer uses the SOFT, SHARP, HEAVY and LIGHT sound
quality coordinates to achieve subtle sound quality settings with ease.
Press [30 Al] to adjust the surround level.
Every time you press the button:
3D Al 1
1_
3DAI 2
AI-EQ’
Adjust the sound quality.
© ^---------
)
direction: SOFT-SHARP setting
©it direction:
LIGHT-HEAVY setting
Repeat steps ® and © to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQ] to display “FLAT’.
• The sound quality setting is stored automatically. It is recalled when
“AI-EQ" is next selected.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.