Casio Celviano 6ES1A - Manual (Page 63)

English
Assembling the Stand
E-59
9.
Next, secure the bottom of the back panel 
with the six screws  .
10.
Adjust the height adjustment screw  to
provide support so the crosspiece  does
not bow downwards when the pedals are
pressed.
IMPORTANT!
• Pressing the pedals without adjusting the height
adjustment screw  can result in damage to the
crosspiece  . Always make sure you adjust the
height adjustment screw  before operating the
pedals.
1.
Orienting the pedal plug as shown in the
illustration, plug it into the pedal connector on
the bottom of the piano.
• Secure the pedal cord with the clip  .
2.
Check to make sure that the POWER button
is in the OFF position (raised). If power is on,
press the POWER button to turn it off.
3.
Plug the power cord that comes with the
Digital Piano into the AC power jack on the
bottom of the Digital Piano.
*
* applies to the AP-620BKV and AP-6BPV
IMPORTANT!
• The shape of the power cord plug and household
power outlet receptacle differ according to country
and geographical area. The illustration shows just
one example of the shapes that are available.
• With the AP-620BK and AP-6BP, the power cord is
hard-wired to the Digital Piano.
F
C
9 D
To connect cables
G
Pedal plug
Power Cord
B