Casio Celviano 6ES1A - Manual (Page 61)

English
Assembling the Stand
E-57
3.
Slide the back panel  into the grooves  of
the side panels.
IMPORTANT!
• Be sure to check that the back panel  bracket
engages correctly with the side panel  bracket as
shown in the nearby illustration marked “O”.
Assembling the stand while these brackets are not
engaged correctly (as shown in the illustration
marked “X”) creates the risk of damage to stand
components.
4.
Attach the right side of the back panel  to
the bracket  of the side panel  .
• Secure the back panel in place with a screw  .
5.
Pull the side panel  slightly outwards in the
direction marked with

in the illustration
below.
• Check to make sure that the relative positions of the
back panel
 bracket and the side panel  bracket
are as shown in the illustration A. This step creates a
slight gap between the side panels
 and  , which
makes it easier to mount the Digital Piano onto the
stand in step 6 below.
C
4
B
C
Back panel 
bracket
Side panel  bracket
5
A
I
C
B
C A