Casio Celviano 6ES1A - Manual (Page 49)

English
Using a Memory Card
E-45
IMPORTANT!
• Format a memory card before using it for the first
time.
• Before formatting a memory card, make sure it does
not have any valuable data stored on it.
• The memory card format operation performed by this
Digital Piano is a “quick format”. If you want to
completely delete all of the data on the memory
card, format it on your computer or some other
device.
1.
Insert the memory card you want to format
into the Digital Piano’s memory card slot.
Make sure the write-protect switch of the memory card
is not in the write-protect position so writing is enabled.
2.
While holding down the  (FUNCTION)
button, press the  (CARD/INTERNAL)
button.
This displays the format screen.
3.
Press the  (ENTER) button.
This will display a confirmation message (SURE?).
•
If you want to cancel the format operation, press the
 (NO) or  (EXIT) button.
4.
Press the  (YES) button.
• The message “Please Wait” will remain on the
display while the format operation is being
performed. Do not perform any Digital Piano
operation while this message is on the display.
“Complete” appears on the display after formatting
is complete.
Use the following procedure to save Digital Piano data
to a memory card.
• Recorder songs can be saved as a standard MIDI file
(SMF format 0).
• User songs (downloaded songs, etc.) cannot be
saved to a memory card.
1.
Insert a memory card into the Digital Piano’s
memory card slot.
2.
Select the data you want to save to the
memory card.
3.
Hold down the  (CARD/INTERNAL) button
until the “LOAD” screen appears for the data
you selected.
• You can cancel the LOAD/SAVE operation any time
by pressing the
 (EXIT) button.
4.
Press the  (i) button to switch to the
“SAVE” screen for the data you selected.
• If you are saving a recorder song to a standard MIDI
file (SMF), press the
 (i) button again so “SMF” is
displayed on the right side of the screen.
Formatting a Memory Card Saving Digital Piano Data to a
Memory Card
To select this
type of data:*
1
Do this:
User rhythms Select from among user rhythms 001
through 010 (page E-20).
User Music
Preset Select from among user Music Preset
001 through 050 (page E-27).
Recorder songs Select from among recorder songs 1
through 5 (page E-34).
Registrations *2 Press the  (REGISTRATION) button
so its lower lamp is lit.
*1 For more information about data types, see page
E-43.
*2 All registration data (8 banks × 12 areas) is saved
in a single file.