Casio Celviano 6ES1A User Manual
Page 62
E-58
Assembling the Stand
6.
Place the piano onto the stand.
IMPORTANT!
• In order to ensure you do not get your fingers
pinched between the piano and the stand, grasp the
piano on its sides (not its ends) at the locations
marked with stars (
) in the illustration.
7.
First, use the two butterfly bolts
to secure
the back of the piano to the stand. Next, use
the two screws
to secure the front of the
piano.
IMPORTANT!
• The butterfly bolts
and the screws
keep the
piano from slipping off the stand. Never use the
piano without the butterfly bolts
and the screws
installed.
8.
Attach the left side of the back panel
to the
bracket
of the side panel
.
•
When attaching the back panel, place the clip
on
the screw
as shown in the illustration below.
•
At this time the screws on the bottom of the piano
should hook into the cutouts in the stand
brackets
.
7
At least 10cm
At least 10cm
7
6
Bracket cutout
Back of piano
Stand side
panel
H
K
G
I
8
C
B