Panasonic Portable CD-Rom Player KXL-810A - Manual (Page 32)

Troubieshooting
Trouble Possible Cause Solution
Your computer
does not
recognize the
player, or does
not function
properly.
When Zip or Jaz is connected,
other software than Windows 95
is used.
Use Windows 95 ((sr P. 15).
When Zip or Jaz is connected,
neither of the AC adaptor, alkaline
batteries nor rechargeable battery
is connected (power from the
computer cannot be used when
Zip or Jaz is connected).
Use the AC adaptor, alkaline
batteries or rechargeable
battery ( 0 ^ P. 13,15, 25-28).
When Zip or Jaz is connected, the
player’s terminator is set to OFF.
Set the terminator to ON
(ET P.36).
When Zip or Jaz is connected, the
same SCSI ID number is used for
Zip/Jaz and the player. Change the SCSI ID number
(o^ P. 36) or refer to the
manual of Zip or Jaz.
■ For desktop computer with SCSI board user:
Neither of the AC adaptor,
alkaline batteries nor
rechargeable battery is connected
(power from the computer cannot
be used when the SCSI board is
used). Use the AC adaptor, alkaline
batteries or rechargeable
battery
((ET P. 13, 25~28).
The computer has not been set
up yet.
Set up the computer
((^ P. 16).
The computer was turned on
before the player was turned on.
Turn off the player and
computer, and turn on the
player first then turn on the
computer (asr P. 20).
The SCSI cable is not connected
to the board. Properly connect the SCSI
cable (D^ P. 16).
The same SCSI ID number(s)
is/are used for the player/SCSI
devtce(s) with the daisy chain
connection.
Use the different SCSI ID
number(s) for the player and
each SCSI device(s)
(B^ P. 16, 36).
The player’s terminator is set to
OFF.
Set the terminator to ON
({^ P. 16, 36).
Transmission
speed of data
slows down.
Using the player with the alkaline
batteries/rechargeable battery or
the power from the computer.
Use the AC adaptor.
32