Panasonic Portable CD-Rom Player KXL-810A - Manual (Page 24)

Using the Player with Computer
Insertion / Removal of the interface card
■ For Windows 95 user:
The supplied interface card supports the Hot Swapping (Plug & Play) function. With the
computer turned on, you can insert/remove the interface card without fear of hardware
damage. Before removing the interface card, perform the following steps.
1 Click PC Card icon in task bar.
Slop Panasonic KXLC004
2 Click “Stop Panasonic KXLC004”.
tn Panasonic KXLGQ04:
H Y o u may safely lemove this device.
;""OK""j|
3
4
Make sure that the message “You may safely remove this device” is
displayed, then click I OK |.
Remove the interface card.
■ For DOS / Windows 3.1,3.11
With the computer turned on, you can insert/remove the interface card, if a PC Card
Manager is installed on the computer (refer to your computer manual for details). However,
do not remove the interface card when the POWER/BUSY lamp is lit or you start running
your computer.
When you start running your computer, make sure that the interface card is inserted into
the PCMCIA card slot.
Note:
• If your computer has more than one slot, and if you want to re-insert the interface
card, you must insert it into the same slot it was inserted before.
■ For Windows NT user:
With the computer turned on, you cannot insert/remove the interface card. Please turn off
your computer to insert/remove the interface card.
24