DVR systems DVRxx04LE-S(U) Series - Manual (Page 35)

35
3 Installation and Connections
Note: All the installation and operations here should conform to your local
electric safety rules.
3.1 Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the DVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list on the warranty card (Remote control is
optional). Finally you can remove the protective film of the DVR.
Note
Remote control is not a standard accessory and it is not included in the accessory bag.
3.2 About Front Panel and Real Panel
The model label in the front panel is very important; please check according to your purchase
order.
The label in the rear panel is very important too. Usually we need you to represent the serial
number when we provide the service after sales.
3.3 HDD Installation
3.3.1 8 HDD series
This series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher. It has no
requirement for HDD capacity.
You can refer to the appendix for recommended HDD brand.
Please follow the instructions below to install hard disk.
1. Loosen the screws of the
upper cover.
2. Remove the HDD upper
bracket
3. Now you can see the bottom
bracket
4. Line up the HDD to the
four holes of the HDD
bracket.
5. Use four screws to fix HDD. 6. Install the upper bracket and then
Use screws to fix HDD in the
bracket.