DVR systems DVRxx04LE-A Series - Manual (Page 104)

104
Please refer to the following sheet for detailed information.
Parameter Function
System
Time
Here is for you to modify system time. Please click Save button after
your completed modification
Sync PC You can click this button to save the system time as your PC current
time.
Data
Format
Here you can select data format from the dropdown list.
Data
Separator
Please select separator such as – or /.
Time
Format
There are two options: 24-H and 12-H.
DST Here you can set day night save time begin time and end time. See
Figure 7-24 and Figure 7-25.
Language You can select the language from the dropdown list. Device needs to
reboot to get the modification activated.
HDD Full
There are two options: stop recording or overwrite the previous files
when HDD is full.
When current working HDD is overwriting or it is full now, system
stops record.
If current working HDD is full now, system goes to overwrite the
previous file.
Pack
Duration
Here you can select file size. The value ranges from 1 to 120.Default
setup is 60 minutes.
Device No
When you are using one remote control (not included in the
accessory bag) to manage multiple devices, you can give a serial
numbers to the device.
Video
Standard There are two options: PAL/NTSC.
Please note, for the Web user, this information is for reference only.
You can not modify.
Device
Name Please input the corresponding device name here.
7.3.2.2 Encode
Encode interface is shown as in
X454H454H454H
Figure 7-26
X
.