DVR systems DVRxx04HF-A Series - Manual (Page 39)

39
3.3.2 1.5U series
This series DVR has four SATA HDDs. Please use HDD of 7200rpm or higher.
3.3.3 2U series
This series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the
rear panel and the side panel.
1. Loosen the screws of the
upper cover.
2. Line up the HDD to the four
holes of the HDD bracket.
3. Use four screws to fix HDD.
4. Unfasten the HDD power
cable.
5. Use the special data cable to
connect the HDD and the SATA
port
6. Insert the HDD power cable.
Close the chassis and fix the
screws to secure firmly.
1. Loosen the screws of the
upper cover.
2. Remove the HDD upper
bracket
3. Now you can see the bottom
bracket