Dillon GS Plus Force Gauge - Manual (Page 10)

GS series User’s Manual REV 2.1 22/01/12
10
Main Menu
Press MENU/ESC key to access the main menu. To move
between the option listed on the main menu page, press UP and DOWN
arrow keys to move the cursor. Press ENTER to select the sub-menus,
activate feature and enter values. Within sub-menus UP, DOWN, LEFT
and RIGHT arrow keys will also change numerical values. Press ESC to
return to the main menu page.
Figure 4 Main Menu
1) AUTO-OFF Press the MENU key, the display will show main menu
page and use UP and DOWN to move the cursor point to AUTO-OFF.
Press the ENTER key. The display will show the Auto-off menu page.
Press ESC key to return to the main menu page.
An Auto-off feature can be enabled to conserve battery power
where the gauge powers down after 5,10 and 15 minutes (depend on
Auto-off time) since the last key press. The AO will appear in the main
display if you activate this feature.
AUTO-OFF MENU
1) OFF
2) 5 MINUTE
3) 10 MINUTE
4) 15 MINUTE
Figure 5 Auto-Off Menu
Use UP and DOWN key to move the cursor. Press the ENTER key
to select auto-off option and return to main menu page.
MAIN MENU
1) AUTO-OFF
2) PASS-FAIL
3) MEMORY
4) CALIBRATION
5) DIAGNOSTIC
6) ABOUT