CANOGA PERKINS 2340 Universal Fiber Optic Modem User Manual
Page 33
EdgeAccess® Universal Chassis System
Model 2340 Model User Manual
4-9
2. At the Trap Configuration screen, type the number for a trap and press
Note: "Master Trap Control" enables or disables all traps; the default is Disabled.
2. Press
3. To return to the System Configuration menu, press
------------------------TRAP CONFIGURATION--------------------------------
1) Master Trap Control Disabled
2) LOS/CLS Traps Enabled
3) SQL Traps Enabled
4) Redundancy Traps Enabled
5) Configuration Traps Enabled
6) Diagnostic Traps Enabled
7) Authentication Traps Enabled
8) Power/Fan Malfunction Traps Enabled
9) Cold Start Traps Enabled
10) Alarm Input Traps Enabled
11) Security Violation Traps Enabled
Figure 13. Trap Configuration Screen
Table 14. Trap Definitions
Type of Trap
Definition
2) LOS/CLS
Loss of Signal (electrical)/Composite Loss of Signal (optical); one
or both received signals fail
3) SQL
Squelch (for received signal)
4) Redundancy
Monitors redundant operation activity
5) Configuration
Setup errors, including mismatches with other modems
6) Diagnostic
Monitors loopback
7) Authentication
Checks for SNMP access and read/write community string
8) Power/Fan Malfunction
Power is low or fan is off
9) Cold Start
Monitors the reset function
10) Alarm Input
UCS 1001 function; see the UCS 1001 User Manual
11) Security Violation
Not used