CANOGA PERKINS 2361 T1 Modem - Manual (Page 48)

The EdgeAccess Universal Chassis System
2361 Modem Users Manual 5-6
5.4.3 Remote Loopback
When activated, the Remote Loopback test will cause all data transmission from the local user
device to be looped back after the data Decoder/Encoder functional block in the remote modem.
The remote modem under local loopback will transmit AIS to T1/E1 Line Interface (See Figure
37).
Optical
Link
LIU
Rx
Logic
Tx
Rx
LIU
Mux-
Enc
Demux-
Dec
Demux-
Dec
Mux-
Enc
Fiber Logic Fiber
Tx
AIS
Figure 36. The Modem in Remote Loopback Operation
5.4.4 Remote Loopback with BERT
When activated, the Remote Loopback with BERT test will cause all data transmission from the
local user device to be looped back after the data Decoder/Encoder functional block in the remote
modem. An internal BERT is activated in the local unit which transmits a random pattern data at
payload rate to the remote end and detects the errors received (Figure 38). The remote modem
under local loopback will transmit AIS to T1/E1 Line Interface.
Optical
Link
LIU
Rx
Logic
CHK
QRSS
AIS
LIU
Mux-
Enc
Demux-
Dec
Demux-
Dec
Mux-
Enc
Fiber Logic Fiber
Tx
AIS GEN
QRSS
Figure 37. Remote Loopback with BERT