Canon DR-3080CII - Manual (Page 48)

46 Using the Scanner
Manual Feeding
1. Get ready to perform the scanning operation with your application software,
and set the manual feed function.
Note
When “manual feed” is set, the document feed opening next to the paper feed
tray rises up, allowing you to feed pages in manually. The document feed
opening remains in the upper position as long as “manual feed” is set; if
“automatic feed” is set, the document feed opening descends.
2. Align the paper side guides with the width of the document that is to be
scanned. If the document is printed on a standard size of paper, align the
guides with the appropriate document positioning mark.
3.
Place a single sheet of the document in the paper feed tray and then gently
push it into the document feed opening. The scanner will begin to take the
sheet in and scan it.