Canon DR-3080CII - Manual (Page 27)

Installing the Scanner 25
IMPORTANT
● The DR-3080CII is registered as “CANON DR-3080CII SCSI” or
“CANON DR-3080CII USB” in the “Imaging Device” directory.
● The displayed device name of the DR-3080CII differs depending on the
connection, via SCSI or via USB. When having changed the connection, be
sure to let the PC recognize the scanner once again.
Turning the Power Off
CAUTION
If the scanner will not be used for an extended period of time,
unplug the power cord for safety’s sake.
1.
Turn off the PC.
2. Turn off the scanner.
The power switch is located on the lower right front corner of the scanner. To
turn the scanner off, press the power switch. When the power indicator turns
off, the scanner is off.
Note
● When connecting the DR-3080CII via SCSI, turn the scanner on first, and
then turn the PC on.
● Wait at least 10 seconds before turning the scanner back on.