C.R.Plastic Products L38 - Manual (Page 4)

Step 4: Attach Back Support (F) to Back (E) using two 2” bolts and nylock nuts.
Step 5: Attach back to leg assy. using two 2” bolts and nylock nuts.
Step 6: Attach Front Leg assy. (H) to Seat (G) using six 1/1/2” screws.
Step 7: Attach Seat to completed leg and back assy using four 2” bolts and nylock nuts
Required Qty
Back Assy. (E) 1
Back Support (F) 1
Seat (G) 1
Front Legs (H) 2
1-1/2” Screws 6
2” Bolt
8
Nylock Nut 8
Step 6
Use 1-1/2”Screws and
align with back of 3
rd
slat.
Step 7
Step 4
Step 5