C.R.Plastic Products TB03 - Manual

Product: 37" Pub Table Legs (TB03) with either 32" Round Table Top (TT01) or 37" Round Table Top (TT02)
Your purchase and who is C. R. Plastic Products Inc.?
Parts You will need:
1. Two sets of legs. (A) 1. Drill
2. Two long stringers (B)
3. Two medium stringers (C)
4. Two small stringers (D)
5. Table top (E)
6. Bag of screws (24 - 2½", 4 - 2")
1)
2)
3)
4)
Proudly Made in CANADA
Step 1: Take one of the legs (A), counter sunk holes facing you, and the small
stringers (D). Take one of the small stringers, counter sunk holes facing the bottom of
the table. The holes on the stringer are offset and should be closer to the outside of the
frame. Attach the small stringer (D) using 2½" screws. Repeat on the other side.
Step 2: Take one of the medium stringers (C) and line it up with the middle set of holes
and attach using 2½" screws. Take one of the long stringers (B) and line it up with the
bottom holes and attach using 2½" screws. Repeat to the other side .
Step 3: Take the second set of legs (A) and attach them to the opposite ends of the
stringers using 2½" screws.
Step 4: Place the table top (E) upside down with the frame facing up. Slide the small
stringers (D) into the slots of the frame. Be sure to center it the legs approximately 8¼"
in from the outside edges. Attach the legs to the table top using four 2” screws.
C. R. Plastic Products Inc. is an environmentally conscious Canadian company. Our "Generation Line" of
recycled furniture will give you years of comfort, style and maintenance free enjoyment. You will find your
furniture to be waterproof and durable. By choosing this product, you are saving generations of trees and are
reducing the burden on our landfill sites. Thank you for purchasing from C. R. Plastic Products Inc.
2. #2 Robertson
(square) or Phillips
drill bit.
www.crpproducts.com