BendixKing KSN 770 - Quick Reference Guide - Manual (Page 33)

KSN 765/770 Integrated Communication Navigation Display Pilot QRG
D200909000026 Page 31
REV 2 Jun 2014
When a Direct-To is performed to a waypoint not
contained in the active flight plan (PREV, APT, NAV, INT,
or USER waypoint), the remaining waypoints in the active
flight plan become grayed out and the original flight plan
is suspended until the new Direct-To a waypoint not in the
flight plane is undone.
Direct-To a Waypoint Not in the Flight Plan
When the aircraft passes over the Direct-To waypoint not
in the flight plan, the CDI changes to FROM and the
outbound track is unchanged from the inbound track.
There are three options:
1. Execute a Direct-To a waypoint in the active flight plan.
2. Add more waypoints to the Direct-To a waypoint not in
the flight plan.
3. Push the Direct-To key ( D ), then push UNDO .