BendixKing KXP 756 - Manual (Page 11)

10
Navigation Indicator
Omni-bearing Selector (OBS)
The omni-bearing selector is
used to select the desired course.
The VOR radial selected serves as a
reference for all VOR indications.
VOR/LOC Deviation Indicator
The VOR/LOC deviation needle
indicates the direction and amount of
deviation from the selected VOR radial
or localizer path.
Glideslope Deviation Indicator
The Glideslope deviation needle
indicates the direction and amount of
deviation from the glidepath.
TO/FROM Indicator
The TO/FROM flag indicates
whether the direction to the VOR
station is within the semicircle
centered about the direction selected
on the omni-bearing selector or within
the semicircle centered about the
reciprocal of the selected course. If
the station direction is within 90
degrees of the selected course radial,
the FROM flag will be visible.
VOR/LOC Warning Flag
The VOR/LOC warning flag is
fully visible when the VOR or LOC
signals are unreliable or when a
malfunction has occurred in the NAV
receiver. The flag is out of view when
the signal is reliable and the system is
operating properly.
Glideslope Warning Flag
The Glideslope warning flag is
fully visible when the glideslope signal
is unreliable or when a malfunction
has occurred in the glideslope
receiver. The flag is out of view when
the signal is reliable and the glide-
slope receiver is functioning properly.
Navigation Indicator
N
S
E
W
OBS
TO
FR
GLIDESLOPE
WARNING FLAG
GLIDESLOPE NEEDLE
OBS KNOB
TO-FROM FLAG
AZIMUTH CARD
VOR / LOC
NEEDLE VOR / LOC WARNING
FLAG
3
6
12
15
12
24
33
30
GS
N
A
V