BendixKing AV8OR 3D - Manual (Page 69)

DRAFT
Configuration Settings
58 AV8OR 3D User Guide
INU Settings
Simulation Settings
Menu Choice Available Settings
Altimeter mode Barometric or GPS altitude
Barometric settings Used to calibrate the display with the baro-
metric sensor in the INU.
In the Barometric Settings field, press the
display to highlight the barometric number.
Use the rocker button on the top of the tablet
PC to adjust the barometric setting up or
down.
Adjustment If the INU is not set perfectly flat in the aircraft,
you can specify the pitch and bank angles by
tapping to highlight the field and using the
rocker button on the top of the tablet PC to
adjust the setting up or down.
Reset connection Resets the connection between the INU and the
tablet PC.
Menu Choice Available Settings
Start / Stop Starts or stops a simulation flight
Position at Set the current position of your aircraft in the
the simulation. To change:
1) Tap in the field to display the Virtual
Keyboard.
2) Enter the position code and press ENTER.
Simulation rate Tap in the field to enter a faster rate and speed
travel between waypoints.