Draft – BendixKing AV8OR 3D User Manual

Page 29

Text mode
Original mode

DRAFT

Preparing for Flight

AV8OR 3D User Guide

If the database has expired, the

AV8OR 3D navigational component will still

operate normally. However, the aeronautical information will no longer be

valid and may not be accurate.

3. Acknowledge the status of the database by pressing any hardware button on

the tablet PC.

After you acknowledge the status of the database, the tablet PC will establish a

connection to the INU. Once the connection is made between the two units, the

AV8OR 3D application displays the current status of the GPS signal acquisition.
The INU requires the tracking of at least three satellite signals. Once this occurs,
the tablet PC will indicate that GPS signals are being acquired and that the unit is

ready for use. On the front of the INU, all three status LEDs will light.

Note:

The INU is optimized for in-flight use. Static testing on the ground may produce

unreliable behavior.