Error messages, Starting the weather service, Draft – BendixKing AV8OR 3D User Manual
Page 30
DRAFT
Preparing for Flight
AV8OR 3D User Guide
19
Error Messages
The following error messages may appear during this initialization process:
•
“Error - No Bluetooth radio component found. Please activate the Bluetooth
radio and retry. If the error persists, contact
Honeywell Customer Support.”
There is a fault between the INU and tablet PC Bluetooth connection. This
could indicate that the INU and tablet PC might be two far from each other,
or there may be an obstacle between the two units causing some kind of inter-
ference. It could also indicate that the INU is not turned on. Examine your
physical connections and then choose “Retry” by pressing any tablet PC
button. If the problem persists, please contact
Honeywell Customer Support.
•
“Warning - INU not found. Please make sure that the INU is turned on and
retry. If the error persists, contact
Honeywell Customer Support.”
The dialog will show two buttons: “Retry” and “Simulation”.
–
If your intent is to use
AV8OR 3D for navigation, check to make sure the
INU power is turned on. Then choose Retry by pressing any tablet PC
button. If there still is no connection, please contact
Honeywell Customer
Support.
–
If your intent is to use the
AV8OR 3D simulation mode, click on the Simula-
tion button.
Starting the Weather Service
Turn on the XM weather receiver with the antenna visible to satellites. It may take
several minutes for the XM receiver to acquire a signal and download weather
data.
Press the Cfg button and the XM Info tab to display the status of downloaded
data. Refer to
for more information.
The live weather option includes the following features:
•
TFR (Temporary Flight Restriction): This airspace is displayed in red on the
2D view. A TFR can have an activation date and an expiration date. By
default, a TFR is displayed if it doesn't have any activation and expiration
date, or if it already has been activated but is not expired. Three TFR
checkbox options are available in the Display tab of the Setup dialog (see
).
•
NEXRAD radar: This feature is activated by the WX menu. It displays the
precipitation in different colors depending on the intensity and the type of the
rain. It also displays the echo tops in different grey levels.