Beckett 61687 GeniSys Display and Contractor Tool User Manual
Page 9
9
GeniSys Display & Contractor Tool Installation and Operation Manual
E. Service Message Program
From the POST-TIME CHANGE
screen, pressing the NEXT
key will display the SERVICE
MESSAGE, SELECT TO
CHANGE programming screen.
This feature allows customization of
the screen that is displayed when
the burner detects a hard lockout
condition. The screen is divided into
two rows of 16 characters each. These
characters can be selected to display
a custom message. For example, your
business name and phone number can
be displayed when the burner requires
service.
From the SERVICE MESSAGE,
SEL TO CHANGE screen, press the
SEL (YES) button. The message
CALL FOR SERVICE, ###-###-
#### will be displayed. The cursor
will automatically highlight the
space on the lower row to the
left of the number symbol on the
display. These characters have
been preprogrammed, but all the
characters can be easily customized.
SEL
(YES)
Using the PREV and NEXT keys,
scroll through the character set until
the desired character or a space is
displayed, then press the SEL (YES)
key. The cursor will shift to the right.
1.
2.
3.
4.
Again use the PREV, NEXT keys to
display the desired character and
press SEL (YES). Use the BACK
(NO) key to move the cursor to the
previous position. Continue with the
character selection until the screen
displays the desired message.
SEL
(YES)
Pressing the SEL (YES) key at the last
position on the second line moves the
cursor to the fi rst position on the top
line.
When the desired message is
displayed press the BACK (NO) key,
when the cursor is at the beginning of
either line, to save and exit the screen.
5.
6.