Beckett 61687 GeniSys Display and Contractor Tool - Manual

Description / Applications
The Beckett GeniSys TM Display is an optional attachment for the
GeniSys Primary Control that allows a technician to monitor and
program the primary control variables. The Beckett GeniSys
TM
Contractor Tool is a rugged hand-held version of the display
module for use by service engineers. The screen on both the
Display and the Tool show current burner status, control timings,
and burner cycle history. The display and tool programming
mode allows a technician to customize both the pre-time and
post-time settings. When the Display remains on the burner, a
lockout service message can be programmed that displays a
custom message.
for the GeniSys Advanced Burner Control
GeniSys
™
Display
or
Contractor’s Tool
PARTS & ACCESSORIES
This tool is NOT intended for use
on any other Non-GeniSys Control
or Equipment.
Non-intended usage can cause damage to the Contractor
Tool, or the control being tested and potentially alter control or
system operation.