Product features and specifications, Model kn-cob-dp-ls, Model kn-cop-dp-ls – Kidde KN-COB-DP-LS User Manual
Page 9
Tamper-Resist Feature
This is a constant 85dB alert to notify consumers the unit has been
unplugged or has come loose from the outlet. THIS FEATURE IS DIS-
ABLED FROM THE FACTORY. IF TAMPER RESIST FEATURE IS DESIRED,
THE FEATURE MUST BE ACTIVATED TO WORK. To activate the tamper
resist feature: Remove the battery, if previously installed, to make sure
the unit is not receiving power. Next, move the Tamper Resist Activate
Slide towards the bottom of the alarm, away from the Tamper Resist
Activation Switch. Install the battery, noting there is a two minute delay
when power is supplied to give you time to plug in the unit before the
tamper alarm sounds.
This feature is disabled once the battery voltage has reached a level to
cause a low battery warning chirp. Pressing the Test/Reset button will
defeat the 85dB tamper alarm for two minutes to allow time for the
2. Product Features and Specifications
Model KN-COB-DP-LS
Sounder
Alarm
Green
Operate
Light
Test/Reset
Button
Peak
Level
Red
Alarm
Light
Model KN-COP-DP-LS
Tamper-Resist
Activation Switch
(see Normal Operating
Characteristics)
Tamper-Resist
Activate Slide
9 Volt
Battery Door
Screw
(used with
Tamper-Resist
Feature)
2526-7206-00(820-1371 Rev. C).qxd:_ 2012.11.5 2:21 PM