Sangean ATS-909X w (V1) - Manual (Page 24)

RECALLING A STATION IN MEMORY
On LW, press ATS/LW button, then press any of the numbered
buttons on the key pad.
On MW/FM, press ATS/MW button or press ATS/FM button,
select desired page by pressing PAGE button and then press
any of the numbered button on the key pad.
On SW, press METER/SW button, select desired page by pressing
PAGE button and rotating the Rotary Tuning Knob until desired
page is selected and then press Enter Selection button.
The receiver will then automatically search for the strongest
frequency on that page. You may change the selected frequency
using the numbered keys on the key pad.
Recall the station in memory, press the MEMO button and then
press the Cancel button (C button).
CANCELING A STATION IN MEMORY
After programming your stations into memory you may lock any
station into memory to prevent accidental erasure or elimination
should the ATS feature be turned on again.
To lock a station, recall the station you wish to lock and press
MEMO button and then LOCK button. The display will show
memo locked symbol whenever the station is selected. To remove
station from locked position repeat above procedure and locked
symbol will be removed and a station will no longer in locked state.
To LOCK A STATION INTO MEMORY
22 23