Rane SL 1 Quick Start with keyboard shortcuts (200k) - Manual

RANE SL 1 FOR SERATO SCRATCH LIVE • QUICK START 2.4 1
SL 1 QUICK START
Install
Scratch Live
Welcome
Before installing, visit serato.com to
be sure you have the latest Scratch
Live
software update. Check back regularly for
updates, advice and tips. If you are new
to computers and installing software, read
this section first.
1. At serato.com, click DOWNLOADS .
2. See if the version online is higher than
the disc you have.
a. If it is the same, proceed to the Mac or
Windows installation section.
b. If it is higher, click the download link for
Mac or Win software.
3. Enter your email before you can
download. We recommend joining
the Forum to learn more about using
Scratch Live (optional).
4. Do you want to open or save this
file? Click Save, and navigate to an
easy place to find it, such as your
desktop. When using Vista’s Windows
Explorer, click
Browse Folders in the
lower left corner and select Desktop.
3. Follow the on-screen instructions.
To change the directory you wish to
install Scratch Live into, select
custom
Install , otherwise choose complete.
Once the installation is complete,
Scratch Live appears in the Start
Menu under
All Programs > Serato >
Scratch live.
DRIVeR UPDATe Tool
If you forgot or were unable to connect
the SL 1 during software installation, you
can update or install your drivers later by
using the Driver Update Tool. By default
the Driver Updater will be located at
C: > Program Files > Serato > driver_
updater32.exe
or for Vista 64-bit systems:
C: > Program Files (x86) > Serato >
driver_updater64.exe.
1. Connect the SL 1 interface to your
computer with the USB cable. If the
Hardware Wizard shows up, click
cancel.
2. Run the driver_updater.exe utility. If you
are asked whether to install one of the
drivers, choose
continue Anyway and
the utility will confirm that the driver has
been updated.
3. On some Windows machines, each
USB port is treated separately, requiring
a separate driver install for each USB
port. Follow this installation process for
each USB port you will connect to an
SL 1.
5. When the download is complete, click
open.
a. For Mac, just double click the Scratch
live Installer and it will install.
b. For Windows XP, opening this
downloaded file (double-clicking) should
uncompress it. A dialog will ask where
you want the files: choose
Desktop.
Note: if nothing happens when you
double-click the downloaded file, you
will need to install an unzip utility to
uncompress the file. Type “unzip” into a
search engine for several options.
mAc InSTAllATIon
Insert the Software Installation CD and
double-click the installer icon. Mac users
need only connect the SL 1 interface after
installing the software. No extra hardware
installation is required.
WInDoWS XP & VISTA InSTAllATIon
1. Connect the SL 1 to your computer
with the included USB cable. Cancel the
New Hardware Wizard if it pops up.
2. Insert the Software Installation CD.
If the CD doesn’t start automatically,
browse to the CD drive and run
setup.
exe.
a. If you downloaded the installer in
Windows XP as described in the
previous section, double-click
setup.
exe on your desktop.
b. If you downloaded the installer in
Windows Vista, double-click setup.
exe in the compressed (zipped) folder.
If a message tells you the software you
are installing has not passed Windows
logo testing, choose
Allow or continue
Anyway.