Rane RPE 228 Manual - Manual (Page 7)

Manual-7
Device > Name Device
Devices and channels can also be given custom names,
tailored to your installation.
If your installation changes by adding more RaneWare
units, choose Device > Select, and the POLL button to
make the computer recognize currently connected units in the
system.
When multiple units are connected, assign each unit a
unique Device Address number. See page Manual-4.
Security
The RPE can be operated on a daily basis either through a
computer or through the contact closures. To preserve preset
security with a computer operator, the software can be locked
(under
Device), and a system password can be assigned
(under System > Change Password). The default password
is please.
With the device locked, and a user tries to change a curve,
this friendly screen appears.
This selection allows you to enter the Project name,
installation Site and System Engineer for a given project. All
of these are printed on the Device Report printouts. Click in
the edit box or hold the Alt key and press the underlined
character to type new names.
Similar to the password, the Site Installation Info is stored
in the computer, not in each unit. The Site Installation Info is
also stored with backup Memories when you save a unit’s
Memories to a file.
System > Edit Installation Info
System > Site Control Panel Setup
Presets can be customized with names, through System >
Site Control Panel Setup. Here each Memory can have a
logical name.
System > Site Control Panel