Rane MS 1b Mic Stage 2003 version Current is here. - Manual (Page 4)

Data Sheet-4
MS 1b
MICROPHONE STAGE
All features & specifications subject to change without notice. DOC 104514
©Rane Corporation 0802 47th Ave. W., Mukilteo WA 98275-5098 USA TEL 425-355-6000 FAX 425-347-7757 WEB www.rane.com
Chassis Grounding Note
Units with outboard power supplies do not ground the chassis
through the line cord. Make sure that these units are grounded
either to another chassis which is earth grounded, or directly to
the grounding screw on an AC outlet cover by means of a wire
connected to a screw on the chassis with a star washer to guaran-
tee proper contact.
Please refer to RaneNote, “Sound System Interconnection”
(supplied with your manual and available at www.rane.com) for
further information on system grounding.
Architectural Specifications
The microphone preamplifier shall be a single channel stand-
alone unit with remote power supply. The power supply shall be
U.L. listed, C.S.A. certified, and CE certified. The input and
output shall be fitted with XLR connectors. A polarity invert-
ing switch shall be included. Phantom power shall be provided
in compliance with IEC 60268-15 and be controlled by a slide
switch with an LED indicator. A gain control shall be provided
with 18-66 dB adjustment range. Power, system signal and
overload indicators shall be provided. High current cross-coupled
active output line driver shall be standard, as well as input RFI
filter protection.
The unit shall be a Rane MS 1b Microphone Stage.