Rane MLM 103 2000 version - Manual (Page 3)

Manual-3
REAR PANEL DESCRIPTION
ቢ MIC/LINE INPUT TRIM controls 1-6 adjust the input gain of the Mic/Line Inputs. The gain range for Mic level is 12 to
60 dB. The gain range for Line level is -4 to 12 dB.
ባ LINE/mic INPUT buttons 1-6 switch the sensitivity and input impedance for either a microphone or line input. Mic level
is selected when the button is in the “out” position. Line level is selected when the button is in the “in” position.
ቤ MIC/LINE INPUT connectors 1-6 are balanced Euroblocks that connect either microphone or line signals.
ብ PHANTOM POWER button applies 12 volt phantom power to each pair of Mic/Line Inputs.
ቦ STEREO LINE INPUT connectors 7/8 and 9/10 are pairs of balanced Euroblock connectors, to accommodate stereo or
mono line level signals.
ቧ PRE/post MIX LEVEL DIRECT OUTPUT buttons. When this switch is in the “in” position, the Direct Output signal is
not affected by the Input’s Level control. When this switch is in the “out” position, the Direct Output signal is affected by
the Input’s Level control.
ቨ DIRECT OUTPUTS are balanced Euroblocks that directly connect each Mic/Line Input signal to other audio devices as
needed. These Direct Outputs are post-Equalizer.
ቩ A, B and AUX OUTPUT connectors. One 6-post balanced Euroblock connects the A mix and the B mix to other audio
devices as needed. The other 3-post balanced Euroblock connects the AUX mix to other audio devices as needed.