Rane AD 13 - Manual (Page 13)

MAXIMUM POWER CONSUMPTION: 30 Watts
12
All specifications subject to change without notice, hopefully for the better.
Note: 0dBu = 0.775Vrms
WEIGHT: 8 Ib net
1.75”H x 19”W x 8.5” rack depth
All steel chassis & front panel
DIMENSIONS:
OUTPUT SPECIFICATIONS:
Output Impedance: 600 ohms balanced; 300 ohms unbalanced
Maximum Output Level: +26dBu
Output Gain Range: Off to +20dB
Overload LED Threshold: 4dB below clipping
INPUT SPECIFICATIONS
Input Impedance: 10k ohms
Maximum Input Level: +22dBu
Input Gain Range: Off to +6dB
EMI/RFI EMISSION LEVELS: Certified compliance with FCC docket 20780 Part 151 for Class A
computing devices; also satisfies VDE0871 for Class A computing
devices
RESIDUAL PROPAGATION DELAY: 190µs.
INTERMODULATION DISTORTION (SMPTE): less than 0.1% @ +4dBu
THD + NOISE: less than 0.l%, 20-20kHz @ +4dBu, unity gain
SIGNAL-TO-NOISE RATIO: 84dB minimum below +4dBu,
(20kHz noise bandwidth, unity gain)
DYNAMIC RANGE (ratio of maximum output level to the noise floor): 90dB min (20kHz
bandwidth, any delay setting)
FREQUENCY RESPONSE: 20-20 kHz, ±1 dB
ANTI-ALIASING & SMOOTHING FILTERS
Type: 9th-order elliptic
Features: Linear Group Delay
Quantity: 4 (1 input, 3 output)
Conversion Rate: 50kHz oversampling
Type: Linear pulse code modulation (PCM). (Philips CD data converters).
Quantity: 4 (1 A/D, 3 D/A)
TIME DELAY
Range: 0 to 655ms
Increment Size: 20µs or 1 ms throughout entire range
Readout: 3 digit LED with autoranging decimal point. Accuracy: ±5%
DATA CONVERTERS
VIII. SPECIFICATIONS