Citizen Systems iDP-3540 - Manual (Page 40)

iDP-3540/41 User’s Manual
CITIZEN 40/48
This command feeds the paper (skips) “n” lines without any printing. However, this cannot exceed
the length of one page. (1
£n£126)
12-2-18. Skip Perforation Cancel Command
1 st byte
D8 D1
0 0 0 1 1 0 1 1
ESC (1B) H
2 nd byte
D8 D1
0 1 0 0 1 1 1 1
N(4F)H
This command cancels the skip perforation function.
12-2-19. Full Cut Command (iDP3541 Only)
1 st byte
D8 D1
0 0 0 1 1 0 1 1
ESC (1B) H
2 nd byte
D8 D1
0 1 0 1 0 0 0 0
P(50)H
3 rd byte
D8 D1
0 0 0 0 0 0 0 0
0(00)H
A full cut the paper is performed by this command (one connecting point remaining).
12-2-20. Partial Cut Command (iDP3541 Only)
1 st byte
D8 D1
0 0 0 1 1 0 1 1
ESC (1B) H
2 nd byte
D8 D1
0 1 0 1 0 0 0 0
P(50)H
3 rd byte
D8 D1
0 0 0 0 0 0 0 0
1(01)H
A partial cut of the paper is performed by this command.