Vermont Casting EWF30 - Manual (Page 25)

25
Vermont Castings EWF30
20008662
U.S.
Round Top Termination Top used to terminate chimney at roof.
(Flashing not included.) RLTSK8
Round Top Termination - Top used to terminate chimney at chase.
Extended (Flashing not included.) RLTSK8L
Flashing Metal finishing required around Contemporary 8-6-12 with 8" flue:
Termination to prevent rain leakage. 0-6/12 pitch
8-12-12 with 8" flue:
6/12-12/12 pitch
Square Termination - Top housing of simulated brick pattern S20B (R,T,W)
Housing available in red, tan or white. Appropriate Must include
adapter required. Flashing included. PLTSK8 or SLTSK8
Adapter Kit Unites Square Termination with chimney CF8CA
pipe (required).
Housing Extensions Extends Square Termination on steep 202036
pitched roofs.
Square Chase Termination Housing used to terminate chimney through CT100
a chase top. Appropriate adapter required.
(Flashing not included.)
Adapter Kit Unites Square Chase Termination with chimney CTSK
pipe (required).
Chase Top Housing Low profile pyramid-style chimney cap used to PTLSK8
terminate chimney through a chase. Includes
adapter. (Flashing not included.)
Chase Top Housing Square chimney cap used to terminate chimney SLTSK8
through a chase. Terra Cotta Masonry. Includes
adapter. (Flashing not included.)
SK8 Chimney Sections Pipe used to build 8" (SK8) flue systems. SK81 (1' Long)
SK818 (1¹⁄₂' Long)
SK83 (3' Long)
SK84 (4' Long)
SK8 Chimney Elbows Elbow used to create an offset in an 8" SK830-2
chimney system. Only 30˚ elbows available.
Packaged 2 per carton (offset and return).
Firestop Required at each floor level of chimney SKFS2A —
installation. (Plus attic on multi-story installation.) (8" straight flue)
SKFS6A —
(8" 30˚ inclined flue)
Chimney Support Used to support chimney for each of: 30' vertical SKCS8
height and 6' of angled chimney run.
Canada
Chimney Collar Enclosure
Installs on the "over the chimney collar" of the CCE-SK
fireplace; provides outside air to assist in cooling
the chimney system.
Attic Insulation Shield Used to prevent insulation from coming in AIS-SK
contact with the chimney system.
SK8 Chimney Sections Used to build chimney systems exposed above SK818CAN (1¹⁄₂’ Long)
roof. SK84CAN (4' Long)
45˚ Chimney Elbows Provides 45˚ offset and return. For Canadian SK845/2
installations only. For use with SK8 chimney only.
(Maximum use of 2, or 1 pair.)
Chimney Components
Component Description Model Number