Wilbur Curtis PTT3 - Manual (Page 3)

3
Programming
Program Menus
Tea By Volume
Tea Recipes
Tea By Time
Program Menus screen. Press > button, to show the next menu item.
Tea Recipes (Factory set to Standard Tea Purple)
Press  to Select. Press < or > to scroll through recipes: Standard Gray, Standard Purple, Tropical Gray, Tropical
Purple, 76/308 Gray or 76/308 Purple. Press  to set.
Tea Dilut Volume
Tea Dilut Delay
Tea Dilut Time
Tea by Volume: Press  to select, Display will now show Push START To Begin... Press the BREW button then hot
water starts running, when desired volume is reached press BREW button again to stop the flow. Now the volume has
been set. Pressing > button will display the subsequent menu features.
Tea by Time (Factory set to 5:52)
Press  to select. By pressing < or > buttons, you can increase and decrease time. Press  to set minutes and
seconds. Units with the half batch option, the Half Batch brew button is factory set at for half the brew time (2:56).
Tea Dilution Delay (Factory set to 0:30)
Press  to Select. Press < or > buttons, to add or decrease time. Press  to set.
Tea Dilution Volume: Press  to Select, Display will now show Push START To Begin... Press the BREW button and
water will flow, when desired volume is reached press BREW button again to stop the flow. Now the volume has been
set. Press > to display subsequent menu features.
Dilution Time (Factory set to 4:05)
Press  to Select. By pressing < or > buttons, you can increase and decrease time. Press  to set minutes and
seconds.
Tea Dilution Stir (Factory set to ON).
Press  to Select. Press < or > buttons, to toggle between OFF and ON. Press  to set.
Tea Pulse Brew (Factory set to OFF).
Press  to Select. Press < or > to select ON, OFF or D. D is a manual adjust from 1 to 20 pulses with an ON time
from 5 to 150 seconds and an OFF time from 5 to 150 seconds.
Tea Fast Brew (Factory set to OFF).
Press  to Select, press < or > to choose ON or OFF. Selecting ON will start hot water spraying in the brewcone first
and then 1 minute later the dilution water will start to flow.
Tea Half Batch (Factory set to OFF).
Press  to Select. Press < or > buttons, to toggle between OFF and ON. Press  to set.
Tea Drip-Out (Factory set to OFF)
Press  to Select. Press < or > to adjust time. Settings are OFF, up to 15 minutes, at one minute increments.
Temperature (Factory set to 204ºF)
Press  to Select. Press < or > to increase or decrease setting. Temperature range, from 170ºF to 208ºF in 2-degree
increments.
Energy Save Mode (Factory set to OFF)
Press  to Select, < or > ON, OFF or ON 140ºF ,  to set. When in ON, unit will automatically shut off 4 hours from
last brew. When feature is OFF, unit does not have the energy saving mode.
In the ON 140ºF position, temperature goes down to 140ºF. if unit has not brewed in 4 hours. This feature will save
energy by maintaining a lower temperature in the tank during periods of non-operation.
* On units with the half batch option, the half batch brew button may be independently set.
Temperature
Continued on Page 4
Tea Dilut Stir
Energy Save Mode
Tea Pulse Brew
Tea Fast Brew
Tea Half Batch
Tea Drip-Out
*
*
*
*
*