3 date & time – Y-cam Cube User Manual
Page 74
Page 74
6.9.3 Date & Time
Allows you to set the date and time - used for the timestamp of any files created by the camera.
[Current device time] Internal time of the Y-cam.
[Proposed device time] PC system time. On clicking Apply the internal time of the Y-cam will be changed to this time.
[Select to change the time zone for the device location] Choose your time zone.
[Daylight saving time] tick the box to enable daylight saving time.
[Date and Time format] Select the format of the date and time.
[Auto time setting (SNTP)] Enable or disable the auto time setting to update to the server below.
[Time server] Type the SNTP server name. There are suggestions included.
Note:
1.
If the SNTP server is not found the Y-cam’s time will be synchronized with the PC time.
2.
The Y-cam keeps track of the time even when power is disconnected.
Click Apply to confirm your settings.