Y-cam Cube - Manual (Page 59)

Page 59
6.8.3.1 E-mail alarm sending
The Y-cam can also be configured to send an email when the Motion Detection alarm is triggered.
[Snapshot from] Select snapshot stream source.
[Snapshot duration] The number of seconds that the camera should keep sending emails with attached image after
motion stops.
[Snapshot frame rate] The number of frames per seconds that the camera should keep sending images at when an
alarm is triggered.
[Alarm interval] This is the number of seconds for which the camera should stop sending e-mail alerts after the first set.
Setting the time to 0 disables this feature.
[SMTP server name] Type the name or IP address of the SMTP server you want to use for sending the e-Mails. Please
note that some networks do not allow e-mail relaying. Check with your system administrator or Internet service provider
for more details.
[SMTP server port] The port number of the e-mail server (default is 25).