Y-cam Cube - Manual (Page 60)

Page 60
[Secure SSL connection] Select whether your SMPT server requires an SSL connection.
[Authentication] Select whether authentication is required by the SMTP server.
[User name] & [Password] Type the user name and password of the e-mail account you wish to use. This field is
required if your SMTP server requires authentication.
[Re-type password] Re-type the password.
[Sender e-mail address] Type the e-mail address of the account you are using to send the e-mail. This will be the address
the emails come from.
[Receiver e-mail address] Type the recipients’ e-mail addresses for who you want the emails to be sent to. Up to 3
addresses can be entered.
[Subject] Subject of the e-mail that is sent. Entering a relevant subject will help identify the alarm better. i.e. “Garage
Alarm”
[Message] Type the text you wish to appear in the e-mail. E.g. this is to notify you that your alarm has been triggered.
Notes:
Email settings can be obtained from your e-mail service provider. An SMTP email account is required – these are very
common if you use POP3 email and some IMAP servers. A true IMAP server will not work.
Some ISPs won’t let you use any other SMTP server other than their own (British Telecom BT is a good example of this).
Click Apply to confirm your setting.