Y-cam Cube - Manual (Page 67)

Page 67
6.8.3.7 Snapshot to Storage on Alarm
[Snapshot from] Select snapshot stream source.
[Snapshot duration] The number of seconds that the camera should keep sending images after motion stops.
[Snapshot frame rate] The number of frames per seconds that the camera should keep sending images at when an
alarm is triggered.
[Alarm interval] Number of seconds for which the camera should stop sending e-mail alerts after the first set. Setting
the time to 0 disables this feature.
[Image file name] Name of file image snap shots are saved to
[Suffix of file name] Choose between Sequence number and Date
Click Apply to confirm your settings.