Canon eos rebel T2i - Manual (Page 90)

3 Auto Exposure BracketingN
90
Follow steps 1 and 2 to turn off the AEB amount display.
The AEB setting will be canceled automatically if the power switch is
set to <2>, flash recycling is complete, etc.
Using AEB with continuous shooting.
If continuous shooting (p.70) has been set and you press the
shutter button completely, the three bracketed shots will be taken
continuously in this sequence: Standard exposure, decreased
exposure, and increased exposure.
Using AEB with <u> single shooting.
Press the shutter button three times to take the three bracketed
shots. The three bracketed shots will be exposed in the following
sequence: Standard exposure, decreased exposure, and increased
exposure.
Using AEB with exposure compensation.
Centering on the exposure compensation amount, AEB will be
applied.
Using AEB with the self-timer or wireless remote control.
With the self-timer or wireless remote control ( or ), you
can take three continuous shots. With set, the number of
continuous shots will be three times the number set (p.57).
Canceling AEB
Shooting Tips
Neither flash nor bulb exposures can be used with AEB.
If the [2 Auto Lighting Optimizer] (p.103) menu is set to other than
[Disable], the AEB’s effect might be minimal.
COP
Y