9 heat sink, 9 heat sink –16 – Compaq P 110 User Manual
Page 80
5–16
Maintenance and Service Guide
Removal and Replacement Procedures
5.9 Heat Sink
1. Prepare the computer for disassembly (Section 5.3) and, in
the order below, remove the following components:
❏
LED cover (Section 5.5)
❏
Keyboard (Section 5.6)
❏
Optical drive (Section 5.7)
❏
Display (Section 5.8)
✎
The heat sink is secured to the base enclosure by five screws that
are two different sizes. Be sure to carefully note the size and
location of each screw.
Heat Sink
Spare Part Number Information
Heat sink
233555-001
See also other documents in the category Compaq Monitors:
- P1220 (18 pages)
- L1502 (48 pages)
- ProLiant 2500 (3 pages)
- L1740 (7 pages)
- TFT 5000R (56 pages)
- MV 540 (74 pages)
- TFT5000 (26 pages)
- V 55 (21 pages)
- V700 (20 pages)
- FP745A (66 pages)
- P700 (22 pages)
- 1825 (31 pages)
- 7500 (54 pages)
- 5700 (54 pages)
- ProLiant ML530 (39 pages)
- 5500 (36 pages)
- S900 (19 pages)
- P910 (29 pages)
- HW191 (20 pages)
- TFT 1501 (38 pages)
- MV 5500 (3 pages)
- 5017 (44 pages)
- TFT 2025 (36 pages)
- TFT 8000 (123 pages)
- 7020 (35 pages)
- D-1H (34 pages)
- SCSI (37 pages)
- HW194 (20 pages)
- TFT8030 (42 pages)
- TFT5030 (31 pages)
- 3600 (2 pages)
- 9500 (36 pages)
- L1906 (4 pages)
- TFT5015s (30 pages)
- MV 740 (73 pages)