Compaq P 110 - Manual (Page 78)

5–14 Maintenance and Service Guide
Removal and Replacement Procedures
6. Position the computer with the front facing you.
7. Open the computer.
8. Remove the M2.5 × 4.5 screw securing the display ground
cable to the base enclosure 1 (Figure 5-8).
9. Disconnect the display video cable 2.
10. Remove the four M2.5 × 7 screws securing the display hinges
to the base enclosure 3.
Figure 5–8: Removing the Display
11. Remove the display.
Reverse the above procedure to install the display.